Studio Sub2-10C Subwoofer

 

The Subwoofer Pros Studio Sub2-10C is a “universal” small sub used for bass extension of any studio monitor.  It is sealed and self-powered, offering bass extension to 16Hz.  It is a very compact cabinet with an easy to use control set.  Using a 10” high excursion sub driver, the Studio Sub2-10C is not much larger than many meter bridge monitors.  It has built in Left/Right XLR summing inputs and a low pass filter at 4 different frequencies of 95Hz, 80Hz, 60Hz, and 40Hz.  The different low pass frequencies make it adaptable to various size “main” speakers.

 

The Studio Sub2-10C is different from other subs because it specializes in output below 95Hz, the range which meter bridge monitors are generally not good at.  The sealed cabinet with a linear response sonically outperforms subs that make use of ports, transmission lines, passive radiators or other “boost” technology.  These boost methods create the sonic impression of bass up around 75-85 Hz but actually suffer a severe roll off after the boost.  These boost methods make it more difficult to get proper translation between studio and outside world.

 

The Studio Sub2-10C’s small size allows placement on speaker stands, under consoles, or in locations where larger subs won’t fit.  The Studio Sub2-10C is ideal for multiple sub applications where 3 or 4 subs are used to achieve evenly distributed low end in very small rooms by locating them on different walls.  This multiple sub approach at lower SPL can significantly outperform a single higher SPL sub that generates fewer but higher intensity room modes or nulls.  The modest price, universal fit, and flexible nature of the Studio Sub2-10C makes it an ideal way to start with two and grow your sub system over time.

 

Main Features:

  • 10″ High Excursion EL-10 driver
  • Switchable Low Pass Filter: 95Hz, 80Hz, 60Hz, 40Hz
  • Low Frequency Limit: 16Hz
  • 300w Max Continuous Amp Power
  • Max SPL: 93dB SPL @ 1 meter @ 40Hz
  • 2x XLR Input, summing
  • Compact Cabinet: 12″ x 14″ x 11.5″
  • Weight: 29lbs
  • Made in The USA

 

click here for data sheet pdf

 

 

Enclosure: 18mm 13 Ply Birch Plywood
Finish: Black Ro Tex™ True water born environmental finish
Grille: Black cloth grille
Low Frequency Components: 10” High Excursion EL-10
Input Connector: 2x XLR IN, SUMMING
Input Impedance: 10k/10k each input isolated
Input CAL Sensitivity: @ 40Hz, volume knob at 12 o’clock = -6dBu for full output; @ 40Hz, 1.2V input level sensitivity (knob set to full) = full output
Maximum Continuous Amplifier Power: 300W
Low Pass Filter Switch: 95Hz Infra Filter, 80Hz, 60Hz, 40Hz selectable
Polarity Switch: Normal +, Reversed -
Overload Protection: Dynamic Filter
LED Indicators: Green: Power on/Orange: Dynamic Filter threshold
Mains Voltage Requirements: 100 to 250 VAC Auto Sensing
Frequency Response: +/-3dB 16Hz to 95, 80, 60, 40Hz (depending on switch position)
Low Frequency Limit: 16Hz
Max SPL: 93dB SPL @ 1 meter @ 40Hz
Product Actual Dimensions: 12” x 14” x 11.5” (HxWxD)
Product Actual Weight: 29lbs
Boxed Shipping Dimensions: 17” x 16.5” x 16.5” (HxWxD)
Boxed Shipping Weight: 33lbs