SCM12i Pro

The SCM12i Pro is an installation version of the SCM12 Pro.  It contains all the same features and adds cabinet mounting points compatible with popular wall and ceiling speaker mounts for ease of installation.  Exceptional performance, neutral fidelity, and compact size make the SCM12i ideal for working in multi-channel recording/mixing and immersive audio such as Dolby Atmos, DTS:X, and Auro 3D.



-Wide bandwidth & high SPL capability

-Neutral timbre & low distortion for minimal listener fatigue

-150mm/6” ATC CLD Bass/Mid Driver

-25mm/1” ATC Dual Suspension Tweeter

-Cabinet mounting points for wall or ceiling mount

-Power handling 75-300 watts @ 8 Ohm

-6 year warranty


Mounting points and installation

The SCM12i Pro is fitted with 4 x M8 mounting points on the rear of the cabinet.  These are positioned in standard 69.9mm x 127mm/2.75” x 5” rectangular pattern.  Each point is fitted with M8 x 30 Button Head fasteners which should be used when fixing to the selected bracket.  The SCM12i is compatible with, but not limited to:


Adaptive Technologies

MM-018 Multimount© Pan & Tilt Ceiling Speaker Mount

MM-022-BT Multimount© Pan & Tilt Speaker Wall Mount

MM-060 Multimount© Pan & Tilt Bottom & Rear Speaker Mount


König & Meyer (K&M)

24352 Adapter Panel 1

24481 Speaker Wall Mount (can also mount on ceiling)

24496 Speaker Ceiling Mount



-Ensure all mounting hardware is rated for loads greater than 15kg/33lbs.

-The SCM12i is fitted with a safety anchor point, a single M8 eyebolt at the top rear corner.  This must be tethered to a safety point in addition to primary mounting points for all installations.


Partnering electronics:

ATC P1 Pro or P2 Pro Amplifier


Click here for Product Manual PDF



HF Driver: ATC 1"/25mm Dual Suspension Soft Dome (SH25-76 6 ohm)
LF Driver: ATC 6˝/150mm Constrained Layer Damping (CLD) (SB50-150CLD 8 Ohm)
Amplitude Linearity: 80Hz – 16kHz (+/-2dB)
Cut Off Frequencies: 56Hz – 22kHz (-6dB freestanding)
Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
Max Continuous SPL: 108dB (per pair @ 1m)
Crossover Frequency: 2.2kHz
Recommended Power Amplifier: 75-300 watts
Nominal Impedance: 8 Ohm
Connectors: Binding Posts/4mm Plugs, bi-wire
Cabinet Dimensions (HxWxD): 400x238x235mm/15.7˝x9.4˝x9.3˝ (eye bolt adds 40mm to the depth)
Weight (per cabinet): 15kg/33lbs