This is for small diaphragm (front address) mics with a small diameter body, like a 184, a 54, Schoeps, etc. It uses the same 4 and 5/8 inch diameter Superscreen as the “01” version, but has a different mount arrangement that holds the Supersceen out in front of a small diaphragm mic. As long as the mic body circumference is between 3 and 5/8 inches and 2 and 1/2 inches it will fit.
The “02” mount positions the Superscreen 3 inches out in front of the front edge of the strap itself, so in most cases, the screen will be 1 to 2

inches in front of the mic. This enables you to use small diaphragm mics in situations where popping is a factor, such as horns, dialogue or even vocals.

Pauly Superscreen is 4 ¾” in diameter by 3/8″deep. The finish is non-reflective texture coated medium grey. It screws on to the available mounts with included hardware. The fabric is special material exclusive to Pauly and will last a lifetime if take care of. Do not allow food or spit to accumulate on the screen.

The screen can be cleaned with a very mild soap (such a dishwashing soap) and water. Do not use chemicals or scrub the screen with abrasive.

*For both large and small diaphragm mounts, ask for the PR120-03