ATC SCM25A Compact 3-Way Monitor
The newest product from ATC brings the quality of the ATC 3-Way monitor systems (like the SCM50 and SCM150) to a much smaller footprint!
The SCM25A features a 1" HF driver, 3" proprietary mid-dome, and 7" proprietary short coil carbon paper woofer. The famous low distortion ATC technology is apparent throughout-- including the 4th order critically damped, phase compensated crossover, and passively cooled, FET limited amplifier block. The integrated tri-amplifier provides 150W to the woofer, 60W to the Mid Dome, and 25W to the soft dome tweeter, and has 0 to +6dB bass boost control, as well as a 0 to -6dB input trim. Also provided is a foam port bung to reduce low frequency output in small listening/control rooms. The port bung will give -1.5dB attenuation, centred on 80Hz. Output below 45Hz will increase by approximately 1dB. There will be an optional rackmount system, also provided by ATC, when needed for Broadcast and Television applications.
 |
Specifications:Drivers: HF 25mm/1" soft dome amplitude linearity: 74Hz - 17Khz (+/-2dB) cut-off frequencies: 47Hz - 22kHz (-6dB freestanding) matched response: +/-0.5dB dispersion: horizontal +/-80 coherent max continuous SPL: 109dB (per pair @1m) crossover frequencies/shape: 380Hz and 3.5kHz, 4th order, critically damped with phase compensation input connector: rear panel mounted female XLR (pin 2 +) input sensitivity: 1V rms/ 0dBV/ 1.1dBu (balanced & referenced to full output) input sensitivity trim: 0 to -6dB (continuously variable) input impedance: >10kΩ amplifier output power: HF 25W rms (8 Ω load) overload/clip protection: FET active momentary gain reduction bass boost: 0dB to 6dB @40Hz, continuously variable cabinet dimensions: 10.4x16.9x16.1" (HxWxD) inc. rear mounted handles net weight: 30kg/66lbs mains power requirements: 230/115V 50/60Hz via rear panel switch, 100V 50/60Hz factory set mains power consumption: 56VA (standby max), optional accessories: 19" rack mounting ears |